I am not sure whether it belongs to my car or just a piece of trash from another car. It is for Harrier and Safari, going by the model H/S mentioned in the sheet and is from factory going by the stamps.
BHPian IamGroot recently shared this with other enthusiasts.
Recently I reclaimed my life, i.e., took ownership of Tata Safari XZA+ Adventure Persona Tropical Mist variant. I have followed the Tata Safari review thread on team-bhp from day one till 166 pages. It was a tough decision, especially Toyota Hycross coming in as last-minute option. More on the decision making and delivery experience in another thread. In this thread wanted to highlight something that I came across during a routine clean-up of my SUV interiors.
I had minor niggles post-delivery, engine check light coming on and going away after a long ride. The dreaded DPF regeneration issue, I guess. This in addition to the 5-6 attempts it takes to close the tail gate. During PDI I also saw water on last row. The sales team attributed this to their cleaning process.
Post a weekend drive to Mahabaleshwar, vehicle was up for an interior wipe down. Those red mud marks on light seats look bad. During wipe down I found a small piece of paper in a crevice between front passenger seat and right arm rest. A Quality control check list of sorts. I am not sure whether it belongs to my car or just a piece of trash from another car. It is for Harrier and Safari, going by the model H/S mentioned in the sheet and is from factory going by the stamps. Also, the tail gate issue I am facing is precisely one of the items on the QC sheet. It says OK to most items but not for the tail gate. Instead, it mentions a 6-digit number, could be defect ID.
I am curious to know what the sheet means, especially the “spec” column, and why only nine items are part of this sheet? Are these like known issues and they have a special check list to address these issues? Paradoxically If Tata has a special checklist of know quality issues, then they are doing an excellent job of making sure these issues are not passed-on to customer and then not so respectable job at assembly, since these issues should not be there in first place.
It also raises another question. The VIN of my car MAT123456PXA78912(Masked except for 10th and 12th character) interprets to Jan 2023. And if this piece of paper is indeed from my car them the timestamp of 15 Dec indicates it is not January 2023 manufactured car.
Thanks.
Here’s what BHPian abirnale had to say on the matter:
Maybe – the check-sheet might just be prepared and printed on 15 Dec 22, used on whenever it was used thereafter? A PDI wont be such a short PDI – could be a part of one team’s check on assembly line that messed up and not finding right record instead of stopping it from going out of factory or enforcing redo, they chose to send it out and so you got it with tailgate issue?
The best could be to work with TaMo folks and ask them to verify: if any reliable source in TaMo can cross check your VIN, Defect remarks etc to be from factory floor or something from Dealer. If nothing else – just leave it here and drive car. These bugs in your head tend to become larger over period of time – don’t loose your peace of mind over this.
Here’s what BHPian srh had to say on the matter:
This would most likely be an output from a previous inspections where this defect list would have been compiled. This checklist would then be populated during re-inspection after concerned workers confirm that issues are fixed.
Of as you say, it could be a special additional checklist to cover defects that have been observed in many vehicles produced.
The VIN number is stamped at a specific work station in the manufacturing process. So while this inspection maybe happened on 15th Dec 22, the vehicle reached the stamping work station in Jan-23.
Here’s what BHPian condor had to say on the matter:
The date of inspection is not given any where in the remarks/observations/responses on that sheet.
There is a date on that sheet – but it is printed. Could be date when the checklist was printed.
(As practice, we put dates in the footer of important documents, often to track versions etc).There is no identifying info to say that this checklist is for your Safari.
Why only 9 items ? Cant expect one person doing the full QC of a car – it’s better when split between a few checkers.
Here’s what BHPian svsantosh had to say on the matter:
Having experience in leading Operations @ a mechanical engineering cum SPM equipment manufacturing company I can safely say that this the shoddiest piece of official document I have ever seen.
- Traceability – ZERO (IamGroot – this may very well be another cars paper left in your car glove box
- Branding – zero
- Document # – zero
- Version # – zero
I can go on, but my God, if this is the quality of document used at a QA/QC dept; God save them.
Read BHPian comments for more insights and information.
Source: Read Full Article